David The other thing to add is that this is within scope of the Radio Equipment Directive, which must be applied from 13th June 2017, so you may wish to look at the receiver performance requirements in Draft ETSI EN 303 345 V1.1.1<http://www.etsi.org/deliver/etsi_en%5C303300_303399%5C303345%5C01.01.01_20%5Cen_303345v010101a.pdf>
Regards Charlie From: John Woodgate [mailto:[email protected]] Sent: 18 September 2016 08:58 To: [email protected] Subject: Re: [PSES] FW: Testing to EN 55013 or EN 55032 EN 55032 is the successor of EN 55013, but 55013 is still valid at present, so you could use either, But if the product will continue in production for a year or two at least, it would be sensible to apply 55032, and EN 55035 rather than EN 55020 for immunity. With best wishes DESIGN IT IN! OOO - Own Opinions Only www.jmwa.demon.co.uk<http://www.jmwa.demon.co.uk/> J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: itl-emc user group [mailto:[email protected]] Sent: Sunday, September 18, 2016 8:31 AM To: [email protected]<mailto:[email protected]> Subject: [PSES] FW: Testing to EN 55013 or EN 55032 Hi Would an FM receiver used in a motorcycle helmet be subject to testing under EN 55013 or EN 55032? Thanks in advance for any opinions. Regards, David Shidlowsky | Technical Reviewer Address 1 Bat-Sheva St. LOD 7120101 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail : [email protected]<mailto:[email protected]>/[email protected]<mailto:[email protected]>/[email protected] Web www.itl.co.il<http://www.itl.co.il/> Fill out Customer Satisfaction Survey<http://app.sqm.co.il/SitePages/Questionnaire.aspx> Global Certifications You Can Trust This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
