The draft specifies receiver sensitivity, which is surely not an EMC matter
and severely restricts manufacturers' freedom of design and offering of a
range of products at different prices. It could even be challenged as a
restraint of trade. But I expect it will be nodded through.
 
With best wishes DESIGN IT IN! OOO - Own Opinions Only
 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and
Associates Rayleigh England
 
Sylvae in aeternum manent.
 
From: Charlie Blackham [mailto:char...@sulisconsultants.com] 
Sent: Sunday, September 18, 2016 8:01 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] FW: Testing to EN 55013 or EN 55032
 
David
 
The other thing to add is that this is within scope of the Radio Equipment
Directive, which must be applied from 13th June 2017, so you may wish to
look at the receiver performance requirements in Draft ETSI EN 303 345
V1.1.1
<http://www.etsi.org/deliver/etsi_en%5C303300_303399%5C303345%5C01.01.01_20%
5Cen_303345v010101a.pdf> 
 
Regards
Charlie
 
From: John Woodgate [mailto:jmw1...@btinternet.com] 
Sent: 18 September 2016 08:58
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: Re: [PSES] FW: Testing to EN 55013 or EN 55032
 
EN 55032 is the successor of EN 55013, but 55013 is still valid at present,
so you could use either, But if the product will continue in production for
a year or two at least, it would be sensible to apply 55032, and EN 55035
rather than EN 55020 for immunity.
 
With best wishes DESIGN IT IN! OOO - Own Opinions Only
 <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and
Associates Rayleigh England
 
Sylvae in aeternum manent.
 
From: itl-emc user group [mailto:itl...@itl.co.il] 
Sent: Sunday, September 18, 2016 8:31 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: [PSES] FW: Testing to EN 55013 or EN 55032
 
Hi
Would an FM receiver used in a motorcycle helmet be subject to testing under
EN 55013 or EN 55032?
Thanks in advance for any opinions.
 
Regards,
David Shidlowsky | Technical Reviewer
Address 1 Bat-Sheva St. LOD 7120101 Israel
Tel 972-8-9186113 Fax 972-8-9153101
Mail :  <mailto:dav...@itlglobal.org> dav...@itlglobal.org/dav...@itl.co.il
<mailto:dav...@itl.co.il> /e...@itl.co.il  Web  <http://www.itl.co.il/>
www.itl.co.il
 
 <http://app.sqm.co.il/SitePages/Questionnaire.aspx> Fill out Customer
Satisfaction Survey
Global Certifications You Can Trust 
This e-mail message may contain privileged or confidential information. 
If you are not the intended recipient, you may not disclose, use,
disseminate, distribute, copy or rely upon this message or attachment in any
way. If you received this e-mail message in error, please return by
forwarding the message and its attachments to the sender.
 
 
 
 
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in
well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in
well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org <mailto:emc-p...@ieee.org> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in
well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> >
Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > 
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> >
David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > 

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>

Reply via email to