John

Receiver Sensitivity is an Article 3.2 RF Spectrum matter and not an EMC matter.

Article 3.2 of the R&TTE Directive requires:
radio equipment shall be so constructed that it effectively uses the spectrum 
allocated to terrestrial/ space radio communication and orbital resources so as 
to avoid harmful interference.

Article 3.2 of the Radio Equipment Directive has an additional requirement in 
that it requires:
Radio equipment shall be so constructed that it both effectively uses and 
supports the efficient use of radio spectrum in order to avoid harmful 
interference.

Article 3.2 Harmonised Standards  are effective mandatory as any manufacturer 
not wishing to apply them in full must obtain a Notified Body opinion and the 
Notified Body should really consider Harmonised Standards where they have been 
published.

Regards
Charlie

From: John Woodgate [mailto:jmw1...@btinternet.com]
Sent: 18 September 2016 20:45
To: Charlie Blackham; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] FW: Testing to EN 55013 or EN 55032

The draft specifies receiver sensitivity, which is surely not an EMC matter and 
severely restricts manufacturers' freedom of design and offering of a range of 
products at different prices. It could even be challenged as a restraint of 
trade. But I expect it will be nodded through.

With best wishes DESIGN IT IN! OOO - Own Opinions Only
www.jmwa.demon.co.uk<http://www.jmwa.demon.co.uk/> J M Woodgate and Associates 
Rayleigh England

Sylvae in aeternum manent.

From: Charlie Blackham [mailto:char...@sulisconsultants.com]
Sent: Sunday, September 18, 2016 8:01 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] FW: Testing to EN 55013 or EN 55032

David

The other thing to add is that this is within scope of the Radio Equipment 
Directive, which must be applied from 13th June 2017, so you may wish to look 
at the receiver performance requirements in Draft ETSI EN 303 345 
V1.1.1<http://www.etsi.org/deliver/etsi_en%5C303300_303399%5C303345%5C01.01.01_20%5Cen_303345v010101a.pdf>

Regards
Charlie

From: John Woodgate [mailto:jmw1...@btinternet.com]
Sent: 18 September 2016 08:58
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] FW: Testing to EN 55013 or EN 55032

EN 55032 is the successor of EN 55013, but 55013 is still valid at present, so 
you could use either, But if the product will continue in production for a year 
or two at least, it would be sensible to apply 55032, and EN 55035 rather than 
EN 55020 for immunity.

With best wishes DESIGN IT IN! OOO - Own Opinions Only
www.jmwa.demon.co.uk<http://www.jmwa.demon.co.uk/> J M Woodgate and Associates 
Rayleigh England

Sylvae in aeternum manent.

From: itl-emc user group [mailto:itl...@itl.co.il]
Sent: Sunday, September 18, 2016 8:31 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: [PSES] FW: Testing to EN 55013 or EN 55032

Hi
Would an FM receiver used in a motorcycle helmet be subject to testing under EN 
55013 or EN 55032?
Thanks in advance for any opinions.

Regards,
David Shidlowsky | Technical Reviewer
Address 1 Bat-Sheva St. LOD 7120101 Israel
Tel 972-8-9186113 Fax 972-8-9153101
Mail : 
dav...@itlglobal.org<mailto:dav...@itlglobal.org>/dav...@itl.co.il<mailto:dav...@itl.co.il>/e...@itl.co.il
  Web www.itl.co.il<http://www.itl.co.il/>

Fill out Customer Satisfaction 
Survey<http://app.sqm.co.il/SitePages/Questionnaire.aspx>
Global Certifications You Can Trust
This e-mail message may contain privileged or confidential information.
If you are not the intended recipient, you may not disclose, use, disseminate, 
distribute, copy or rely upon this message or attachment in any way. If you 
received this e-mail message in error, please return by forwarding the message 
and its attachments to the sender.




-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org<mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>>
Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>>
David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>>
-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org<mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>>
Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>>
David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>>
-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org<mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>>
Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>>
David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>>

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>

Reply via email to