IEC 60950-1 and eventually 62368-1. The adapter is not needed for North America where we use standard cables with notched C-15 plugs. No hardware used to hold cables together.
David. De : Adam Dixon [mailto:[email protected]] Envoyé : 14 février 2017 11:18 À : David Gelfand Cc : [email protected] Objet : Re: [PSES] IEC 60320 adapter cable question To what standard(s) are you certifying? 60950, 62368 or other? Are you able to use hardware to hold the two power cords together? I would expect this to be required to meet the protective earth requirement for 60950 Section 3.2.5 Power Cords since you are working with a detachable AC mains configuration, though I don't have standards handy to reference the potential country-specific requirements. Regards, Adam From UL 60950 3.2.1.1 Connection to an a.c. mains supply For safe and reliable connection to an AC MAINS SUPPLY, equipment shall be provided with one of the following: NOTE In many countries, it is a legal requirement to provide a plug that complies with the national wiring rules. – an appliance inlet for connection of a DETACHABLE POWER SUPPLY CORD; 3.2.5 Power supply cords 3.2.5.1 AC power supply cords A MAINS SUPPLY cord shall be of the sheathed type and comply with the following as appropriate: NOTE 1 There is no limit on the mass of the equipment if the equipment is intended for use with a DETACHABLE POWER SUPPLY CORD. • for equipment provided with a DETACHABLE POWER SUPPLY CORD, be not lighter than light PVC sheathed flexible cord according to IEC 60227-1:2007 (designation 60227 IEC 52); – other types of cords may be used if they have similar or better electro-mechanical and fire safety properties as above. NOTE 3 Where national or regional standards exist, they can be used to show compliance with the above paragraph. For equipment required to have protective earthing, a PROTECTIVE EARTHING CONDUCTOR shall be included in the MAINS SUPPLY cord. On Tue, Feb 14, 2017 at 8:53 AM, David Gelfand <[email protected]<mailto:[email protected]>> wrote: My question in particular is, will we comply with local requirements using a country-approved power cable in combination with this type of adapter? De : Adam Dixon [mailto:[email protected]<mailto:[email protected]>] Envoyé : 13 février 2017 18:59 À : [email protected]<mailto:[email protected]> Objet : Re: [PSES] IEC 60320 adapter cable question I have used Stayonline and have been pleased with their breadth and quality of cord options. I don't think they carry part numbers for all of the countries that David mentions for mating with a C16 inlet ("notched C15" is the description on their site), but definitely worth a good look. Cheers, Adam On Mon, Feb 13, 2017 at 5:16 PM, John Woodgate <[email protected]<mailto:[email protected]>> wrote: This company seems to make what you want (cord with C-15 plug), but I have no experience of them: http://www.stayonline.com/ With best wishes DESIGN IT IN! OOO – Own Opinions Only www.jmwa.demon.co.uk<http://www.jmwa.demon.co.uk/> J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: David Gelfand [mailto:[email protected]<mailto:[email protected]>] Sent: Monday, February 13, 2017 9:52 PM To: [email protected]<mailto:[email protected]> Subject: [PSES] IEC 60320 adapter cable question Esteemed colleagues, We have a product rated 1500W with a keyed IEC 60320 C-16 inlet. The C-16 inlet is used for 15A cables for North America (120Vac). For countries that use 230Vac, we have been trying to locate power cords with keyed C-15 plugs with little success. Someone has asked if we can use a C-14 to C-15 adapter cable, to allow connection of standard C-13 power cords. The adapter cable has CE, UL and CSA approvals, and is rated at 15A 250Vac. You can see a spec here: http://internationalconfig.com/documents/98715X3FT.pdf I know next to nothing about power cord requirements. If we use a country-approved power cable and this adapter, would we comply with local requirements? In particular we are looking at Europe, Argentina, UK, Australia and Switzerland. Thanks in advance, David David Gelfand ing./Eng. EMI specialiste en conformité EMI Specialist Conformity Kontron 4555 Rue Ambroise-Lafortune | Boisbriand (Québec) J7H 0A4 | Canada T/P: + 1 (450) 437-4661 x2449<tel:%28450%29%20437-4661> [email protected]<mailto:[email protected]> Website<http://www.kontron.com/> | Blog<http://blog.kontron.com/> | Twitter<https://twitter.com/Kontron> | LinkedIn<https://www.linkedin.com/company/kontron> | YouTube<https://www.youtube.com/channel/UCXkp_1gJbG0Um1vzdowlqww> | Facebook<https://www.facebook.com/kontron> En ouvrant ce courriel, vous acceptez la politique de Kontron relative aux communications électroniques<http://www.kontron.com/about-kontron/legal-and-copyright-information> By opening this email you are agreeing to Kontron’s Electronic <http://www.kontron.com/about-kontron/legal-and-copyright-information> Communications <http://www.kontron.com/about-kontron/legal-and-copyright-information> Policy<http://www.kontron.com/about-kontron/legal-and-copyright-information> <http://www.kontron.com/about-kontron/legal-and-copyright-information> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
