Dear Colleagues, We made a decision to renovate our laboratory with new lab benches. This has led to a bit of a conundrum with our ESD benches. Our local Feng Shui expert has proclaimed that it would not do to have all new lab benches except for our old ESD wooden benches. The issue we keep circling around is the new benches would have steel legs with rubber feet under a non conducting table top. IEC 61000-4-2 seemingly asks for a non conducting table in its entirety. Does anyone know if such a setup deviation would make an iota of difference to the test?
Thanks Kevin ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
