That works (as I indicated in a previous post, as long as the back panel is sufficiently fire-resistant and that is documented) UNTIL (IF) CENELEC actually withdraws the EN, in which case it no longer exists and cannot be mentioned in a DoC.
So what will CENELEC TC61 do? Does anyone know? Clearly it has to be revised, without waiting for the IEC contention to be resolved. With best wishes DESIGN IT IN! OOO – Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. -----Original Message----- From: Dürrer Bernd [mailto:[email protected]] Sent: 21 July 2017 09:17 To: [email protected] Subject: [PSES] AW: Harmonised standard withdrawn Dear Scott, The removal of the reference to EN 60335-2-24 from the OJEU means that compliance with this standard does not provide the presumption of conformity as defined in Article 12 of LVD. Actually, the nationally adopted versions of this standard are still valid (e.g. BS EN 60335-2-24, https://shop.bsigroup.com/ProductDetail/?pid=000000000030236214). As IEC 60335-2-24 is not listed as an international standard in the OJEU, I do not see any advantage in declaring CE compliance with the IEC version, especially as the objection raised by the UK against the use of highly flammable materials would also apply to fridges compliant with IEC 60335-2-24. As risk analysis (preferably according to CENELEC Guide 32) is a mandatory part of the technical documentation (LVD, Annex III, Module A, 2.), the manufacturer is bound to consider the findings in UK's objection and to avoid the use of such materials even if they are compliant with the IEC/EN standard. Please be aware that the obligations of the manufacturer (LVD, Art. 6) also include the monitoring of products already in the market and to take corrective measures if it is found that a product presents a risk. Regarding a new product, you may still refer to EN 60335-2-24, but it will not give you presumption of conformity. With the CE DoC you declare that your electrical equipment provides "a high level of protection of health and safety of persons, and of domestic animals and property" (LVD, Art. 1), using the standard as a technical means to demonstrate compliance, but considering also risks that are not adequately addressed in the standard. Kind regards, Bernd Von: Wiseman, Josh UTC CCS [mailto:[email protected]] Gesendet: Donnerstag, 20. Juli 2017 21:31 An: [email protected] Betreff: Re: [PSES] Harmonised standard withdrawn Scott, You can continue to use EN 60335-1 and reference IEC 60335-2-24 to show compliance. Just because the EN is withdrawn doesn’t mean the IEC is no longer valid. Knowing now about the plastic issue, maybe you do some other evaluation method for it to ensure it’s safe to be used in that application. Josh Wiseman Senior Compliance Engineer Taylor Company Joshua Wiseman Senior Compliance Engineer 750 N. Blackhawk Blvd. | Rockton, IL 61072 Office: 815.624.5628 | Cell: 815.262.5517 | Fax: 815.624.5181 http://www.taylor-company.com/ | https://twitter.com/TheTaylorCo | http://www.youtube.com/TheTaylorCompany ----------------------------------------------- This message is intended only for the recipient(s) named above. It may contain confidential or legally privileged information. If you are not the intended recipient, do not read, copy, use or circulate this message. Instead, please notify the sender immediately by replying to this message and then delete it from your system. Internet communications are not secure. While every reasonable effort has been made to ensure that this communication has not been tampered with, Taylor Company cannot be responsible for alterations made to the contents of this message without its express consent, and Taylor Company accepts no responsibility for changes to or interception of this message after it was sent or for any damage to the recipient's systems or data caused by this message or its attachments. Opinions, conclusions and other information contained in this message that do not relate to the official business of Taylor Company shall be understood as neither given nor endorsed by Taylor Compan y. Please also note that messages to or from Taylor Company may be monitored to ensure compliance with Taylor Company policies and standards and to protect our business. ----------------------------------------------- From: Scott Xe [mailto:[email protected]] Sent: Thursday, July 20, 2017 9:38 AM To: mailto:[email protected] Subject: [External] [PSES] Harmonised standard withdrawn The harmonised standard EN 60335-2-24 is removed from the harmonised standard list on OJEU. The common compliance route of self-declaration of conformity to LVD using harmonised standard becomes lost. What are other options to demonstrating the compliance with LVD? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_emc-2Dpstc.html&d=DwMFaQ&c=ilBQI1lupc9Y65XwNblLtw&r=RyQ6Fr0g7aHfEQCV0zeIZ5rmc48Lfs-2bcf6A3GtyRc&m=EzMmtVsAChI0PUoxZd-jG3QWM48V9wWIGTfBBod8eyM&s=VIRQq3ILdGSf6dvMzNp5OWiCAeSuh8Ssf9WYmfhEpz0&e= Attachments are not permitted but the IEEE PSES Online Communities site at https://urldefense.proofpoint.com/v2/url?u=http-3A__product-2Dcompliance.oc.ieee.org_&d=DwMFaQ&c=ilBQI1lupc9Y65XwNblLtw&r=RyQ6Fr0g7aHfEQCV0zeIZ5rmc48Lfs-2bcf6A3GtyRc&m=EzMmtVsAChI0PUoxZd-jG3QWM48V9wWIGTfBBod8eyM&s=3zDWGtj2JcDcnfAvvRC9oYVUDo7raetrj4p-ATYjkJ0&e= can be used for graphics (in well-used formats), large files, etc. Website: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_&d=DwMFaQ&c=ilBQI1lupc9Y65XwNblLtw&r=RyQ6Fr0g7aHfEQCV0zeIZ5rmc48Lfs-2bcf6A3GtyRc&m=EzMmtVsAChI0PUoxZd-jG3QWM48V9wWIGTfBBod8eyM&s=9w0yYDC69Ng_SmSEIaEmWhzThHwIfwGAhDPAow8jUyY&e= Instructions: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_list.html&d=DwMFaQ&c=ilBQI1lupc9Y65XwNblLtw&r=RyQ6Fr0g7aHfEQCV0zeIZ5rmc48Lfs-2bcf6A3GtyRc&m=EzMmtVsAChI0PUoxZd-jG3QWM48V9wWIGTfBBod8eyM&s=_tfBUhxNcZTrOJohdxg3nlXk7j3uL6EehFkkkYcxflA&e= List rules: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.ieee-2Dpses.org_listrules.html&d=DwMFaQ&c=ilBQI1lupc9Y65XwNblLtw&r=RyQ6Fr0g7aHfEQCV0zeIZ5rmc48Lfs-2bcf6A3GtyRc&m=EzMmtVsAChI0PUoxZd-jG3QWM48V9wWIGTfBBod8eyM&s=-uUeSArkKHSGt0s1-cu4EGS5VC9rX49ocK0RqXkb6Sw&e= For help, send mail to the list administrators: Scott Douglas <mailto:[email protected]> Mike Cantwell <mailto:[email protected]> For policy questions, send mail to: Jim Bacher <mailto:[email protected]> David Heald <mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <mailto:[email protected]> Mike Cantwell <mailto:[email protected]> For policy questions, send mail to: Jim Bacher <mailto:[email protected]> David Heald <mailto:[email protected]> ________________________________ WILO SE Nortkirchenstrasse 100, 44263 Dortmund Amtsgericht Dortmund, HRB 21356 www.wilo.com Vorstand/Executive Board: Oliver Hermes (Vorsitzender/Chairman), Dr. Markus Beukenberg, Carsten Krumm, Eric Lachambre, Mathias Weyers Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Prof. Dr. Norbert Wieselhuber Dieses Dokument ist vertraulich zu behandeln. Die Weitergabe sowie Vervielfaeltigung, Verwertung und Mitteilung seines Inhalts ist nur mit unserer ausdruecklichen Genehmigung gestattet. Alle Rechte vorbehalten, insbesondere fuer den Fall der Schutzrechtsanmeldung. This document has to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our expressed permission. All rights reserved, especially the right to apply for protective rights. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
