Before even my time, but I was told that it was modeled after the classic "VU" meter used in sound recording, and for the same reason that Ghery mentions below.
Brent DeWitt, AB1LF Milford, MA From: Ghery S. Pettit [mailto:[email protected]] Sent: Monday, July 31, 2017 2:16 PM To: [email protected] Subject: Re: [PSES] Quasipeak definition The QP detector was designed in the 1930s to simulate the response of the human ear to impulsive interference. The classic example at the time was the interference from ignition systems in automobiles to AM broadcast receivers, both in the car and nearby. A single click is well filtered by the ear and brain, but as the repetition rate goes up the perceived annoyance and interference goes up. By the time the repetition rate has reached 10 kHz the ear/brain combination is really annoyed and the quasi-peak detector and a peak detector respond about the same. Hope this helps. Ghery S. Pettit From: Paasche, Dieter [mailto:[email protected]] Sent: Monday, July 31, 2017 7:35 AM To: [email protected] <mailto:[email protected]> Subject: [PSES] Quasipeak definition How would you define the Quasipeak detector to somebody that is not EMC knowledgeable. Sincerely, Dieter Paasche Senior Product Developer, Electrical CHRISTIE 809 Wellington Street North Kitchener, ON N2G 4Y7 Phone: 519-744-8005 ext.7211 <http://www.christiedigital.com/> www.christiedigital.com This e-mail message (including attachments, if any) is confidential. Any unauthorized use, distribution or disclosure is prohibited. If you have received this e-mail message in error, please notify the sender by reply e-mail or telephone and delete it and any attachments from your computer system and records. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
