ETSI have published the EN 300 019-series which describes environmental tests (climate, vibration, etc.) for telecom equipment during the conditions as storage, transportation and in-use.
I assume that regular electronic devices (not telecom devices) can use this series to category the devices according to the classes described in the series. In the absence of similar standards for general electronics, use of EN 300 019 should be better than nothing. Or are there other environmental standards that's recommended? Cheers, Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
