Note the change of title and the switch from part 2 of a multi-part
standard (302 066-2) to a single standard (302 066).
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk
Rayleigh, Essex UK
On 2018-07-10 02:20, Larry K. Stillings wrote:
Hi Chet,
ETSI did publish EN 302 066 V2.1.1 (2017-01) for application under the
RED, and contains receiver requirements as specified in TS 103 361
V1.1.1 (2016-03) Clause 9.
Why it was not published as a harmonized standard under the RED is a
good question and I assume only a handful of people actually know why.
My educated guess is because the Commission determined that the
standard did not properly address or meet the spirit of the receiver
requirements as defined in the RED.
A new versions of the standard is in the final draft stage as of June
20, 2018. That may be tracked at the following link
https://portal.etsi.org/webapp/workProgram/Report_Schedule.asp?WKI_ID=53489
Considering how specialized GPR technology is and containing only a
handful of manufacturers across the entire world, I don’t know how
much support ETSI has had in developing the new standards under the
RED and thus the delays in getting an acceptable standard developed.
Yes technically that means a Notified Body must be used to address the
receiver requirements.
Larry Stillings
Compliance Worldwide, Inc.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
