If you will be working on CE marked machinery then review the requirements for the technical file in the Machinery Directive. Also review requirements in the Low Voltage Directive whether machinery or not.
-Dave From: Frank Tang [mailto:[email protected]] Sent: Friday, February 15, 2019 2:15 PM To: [email protected] Subject: [PSES] Intro to Safety Hi Compliance Peers, I'm fairly new to compliance, with 4-5 years EMC experience on ITE products for Americas, Europe, Asia, and some Nebs understanding. Recently began a new opportunity, which encompasses EMC and Product Safety for automation. Only begun reading SEMI S2/S8, and IEC 61010-1. My questions are: 1. Additional standards I should learn? 2. Besides EMC and Safety testing testing what other documents is needed for safety, ie. critical component list? 3. How long does the whole process take? Any help would be great. -Frank - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
