Hi Boštjan:
If you say ES1 and another certification body says ES2, then a negotiation must take place. To avoid negotiation, you must change your verdict to ES2. However, the manufacturer wants ES1, which is determined by the voltage. I agree that the voltage waveform is ES1 value, and the current is not. But only one parameter, voltage or current, is needed to determine ES1. Good luck, and best regards, Rich From: Glavič <bostjan.gla...@siq.si> Sent: Tuesday, March 12, 2019 10:34 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] classification of the output Hi Pete, What manufacturer is expecting is the exact answer. Does this output complies with ES1 or it is ES2? And of course justification for this decision. If I accept it as ES1 and then later the other certification body says it is ES2 it is a big problem for the manufacturer. If you see below my understanding how can we interpret the standard then separation to AC and DC part for the single pulse is not required and limit is always 60Vpk. Do you agree? There is no limitation for maximum duration of the single pulse in the standard. Also pulse off time is not clear (is it time when pulse voltage is at zero or the time when pulse voltage is below certain voltage). I know that as a member of HBSDT and OSM I have tools in my hands however I do not see a quick solution. So some experiences and opinions from members of this group are appreciated. The question that was previously raised at TC was a bit different, it was not a pulsing waveform. Best regards, Bostjan - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>