Hi! Does anyone have any stories that can be shared of a product getting a different ESD test result when changing the brand/model of ESD simulator?
I am a member of the US Technical Advisory Group (TAG) for CISPR/I international standards committee (Electromagnetic compatibility of information technology equipment, multimedia equipment and receivers). There is a proposal that SC77B begin work on changes to IEC 61000-4-2 (ESD) to improve the ESD waveform verification (some call this "calibration") because under today's rules different simulators create different levels of high frequency signal content which some believe is the primary reason for different test results. Some believe that the IEC 61000-4-2 waveform requirement fails to include any evaluation of the slope (dV/dt or dI/dt) of the impulse, and that uncontrolled parameter directly affects spectral content. I would like to know if anyone has experienced any actual ESD test result consistency when using different Brand/model ESD simulators even though they are all calibrated simulators under today's rules. I admit that our company uses the same brand & model ESD simulator as local labs, so I have never observed this issue myself. My initial preference is to not add cost to testing and avoid forcing labs to buy new ESD simulators, but perhaps this cost is warranted if there are actual wide variations in ESD test results depending on the brand of ESD simulator. Thanks. Monrad Monsen | Hardware Compliance Strategist Phone: +1.303.272.9612 Oracle Market Access & Hardware Compliance Strategy 500 Eldorado Blvd | Broomfield, CO 80021 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
