Hi Amund, You might want to look at the Narda 9010F receivers https://www.narda-sts.it/eng/products/receivers/9010f/ I've heard good things about them and the scan speed with the FFT technology would be most valuable for pre-compliance! They also make LISNs.
All the best James James Pawson Unit 3 Compliance Ltd EMC Testing / Design for EMC / Problem Solving / Pre Compliance / Consultancy / Environmental & Vibration -----Original Message----- From: Amund Westin <[email protected]> Sent: 03 September 2020 18:56 To: [email protected] Subject: [PSES] In-house Conducted emission test equipment Need to establish a pre-qual test setup for Conducted emission testing in-house. EUT will be 400V / 16A. Any suggestion on such low cost test eqiupment? LISN and spectrum analyzer …. Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
