So you asked “Any suggestion on such low cost test eqiupment? LISN and spectrum analyzer …”
Take a look at RAMayes https://www dot ramayes dot com/ From: Ken Wyatt <[email protected]> Sent: Friday, September 4, 2020 10:13 AM To: [email protected] Subject: Re: [PSES] In-house Conducted emission test equipment This message originated outside of DISH and was sent by: [email protected]<mailto:[email protected]> Amund, Com-Power has a three phase LISN, model number LI-3P-116, that would work for this application. They also sell a rebranded Siglent spectrum analyzer, model SPA-900TG, they recommend. Personally, I’ve been pretty happy with the Tektronix RSA306B USB-controlled (real time) spectrum analyzer, with their EMCVu software. The software is designed specifically for pre-compliance testing and can do RE or CE with dozens of EMC standards and limits built-in. It will run a peak scan within seconds and then for those peaks over the limit, you just click on each and it will perform a quasi-peak scan pretty quickly. You’d need to enter the frequency response calibration of the LISN into the software, so it could calculate the limit lines accurately. I don’t know pricing for any of this, but typically both companies products are pretty affordable. Disclosure: I’m not financially connected with either company, just a satisfied user. Cheers, Ken _______________________ I'm here to help you succeed! Feel free to call or email with any questions related to EMC or EMI troubleshooting - at no obligation. I'm always happy to help! Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO 80863 Phone: (719) 310-5418 Web Site<http://www.emc-seminars.com> | Blog<https://design-4-emc.com> The EMC Blog (EDN)<https://www.edn.com/electronics-blogs/4376432/The-EMC-Blog> Subscribe to Newsletter<http://www.emc-seminars.com/Newsletter/Newsletter.html> Connect with me on LinkedIn<https://www.linkedin.com/in/kennethwyatt/> On Sep 4, 2020, at 9:38 AM, Amund Jobb <[email protected]<mailto:[email protected]>> wrote: 400AC, Ken. 3-phase. L3, L2, L1, N, PE Ebay may be an alternate, but brand new is also an option. Only peak might be good enough, but QP and Avg are options aswell. BR Amund Sendt fra min iPhone 4. sep. 2020 kl. 17:17 skrev Ken Wyatt <[email protected]<mailto:[email protected]>>: Is that 400V AC or DC? That will make a difference in the LISN design. Ken _______________________ I'm here to help you succeed! Feel free to call or email with any questions related to EMC or EMI troubleshooting - at no obligation. I'm always happy to help! Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO 80863 Phone: (719) 310-5418 Web Site<http://www.emc-seminars.com/> | Blog<https://design-4-emc.com/> The EMC Blog (EDN)<https://www.edn.com/electronics-blogs/4376432/The-EMC-Blog> Subscribe to Newsletter<http://www.emc-seminars.com/Newsletter/Newsletter.html> Connect with me on LinkedIn<https://www.linkedin.com/in/kennethwyatt/> On Sep 3, 2020, at 11:56 AM, Amund Westin <[email protected]<mailto:[email protected]>> wrote: Need to establish a pre-qual test setup for Conducted emission testing in-house. EUT will be 400V / 16A. Any suggestion on such low cost test eqiupment? LISN and spectrum analyzer …. Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher: <[email protected]<mailto:[email protected]>> David Heald: <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
