Amund, Com-Power has a three phase LISN, model number LI-3P-116, that would work for this application. They also sell a rebranded Siglent spectrum analyzer, model SPA-900TG, they recommend.
Personally, I’ve been pretty happy with the Tektronix RSA306B USB-controlled (real time) spectrum analyzer, with their EMCVu software. The software is designed specifically for pre-compliance testing and can do RE or CE with dozens of EMC standards and limits built-in. It will run a peak scan within seconds and then for those peaks over the limit, you just click on each and it will perform a quasi-peak scan pretty quickly. You’d need to enter the frequency response calibration of the LISN into the software, so it could calculate the limit lines accurately. I don’t know pricing for any of this, but typically both companies products are pretty affordable. Disclosure: I’m not financially connected with either company, just a satisfied user. Cheers, Ken _______________________ I'm here to help you succeed! Feel free to call or email with any questions related to EMC or EMI troubleshooting - at no obligation. I'm always happy to help! Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO 80863 Phone: (719) 310-5418 Web Site <http://www.emc-seminars.com/> | Blog <https://design-4-emc.com/> The EMC Blog (EDN) <https://www.edn.com/electronics-blogs/4376432/The-EMC-Blog> Subscribe to Newsletter <http://www.emc-seminars.com/Newsletter/Newsletter.html> Connect with me on LinkedIn <https://www.linkedin.com/in/kennethwyatt/> > On Sep 4, 2020, at 9:38 AM, Amund Jobb <[email protected]> wrote: > > 400AC, Ken. > 3-phase. L3, L2, L1, N, PE > > Ebay may be an alternate, but brand new is also an option. > Only peak might be good enough, but QP and Avg are options aswell. > > BR > Amund > > Sendt fra min iPhone > > 4. sep. 2020 kl. 17:17 skrev Ken Wyatt <[email protected] > <mailto:[email protected]>>: > >> Is that 400V AC or DC? That will make a difference in the LISN design. >> >> Ken >> >> _______________________ >> >> I'm here to help you succeed! Feel free to call or email with any questions >> related to EMC or EMI troubleshooting - at no obligation. I'm always happy >> to help! >> >> Kenneth Wyatt >> Wyatt Technical Services LLC >> 56 Aspen Dr. >> Woodland Park, CO 80863 >> >> Phone: (719) 310-5418 >> >> Web Site <http://www.emc-seminars.com/> | Blog <https://design-4-emc.com/> >> The EMC Blog (EDN) >> <https://www.edn.com/electronics-blogs/4376432/The-EMC-Blog> >> Subscribe to Newsletter >> <http://www.emc-seminars.com/Newsletter/Newsletter.html> >> Connect with me on LinkedIn <https://www.linkedin.com/in/kennethwyatt/> >> >>> On Sep 3, 2020, at 11:56 AM, Amund Westin <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Need to establish a pre-qual test setup for Conducted emission testing >>> in-house. >>> EUT will be 400V / 16A. >>> Any suggestion on such low cost test eqiupment? LISN and spectrum analyzer >>> …. >>> >>> >>> Best regards Amund >>> >>> - >>> ---------------------------------------------------------------- >>> This message is from the IEEE Product Safety Engineering Society emc-pstc >>> discussion list. To post a message to the list, send your e-mail to >>> <[email protected] <mailto:[email protected]>> >>> >>> All emc-pstc postings are archived and searchable on the web at: >>> http://www.ieee-pses.org/emc-pstc.html >>> <http://www.ieee-pses.org/emc-pstc.html> >>> >>> Attachments are not permitted but the IEEE PSES Online Communities site at >>> http://product-compliance.oc.ieee.org/ >>> <http://product-compliance.oc.ieee.org/> can be used for graphics (in >>> well-used formats), large files, etc. >>> >>> Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> >>> Instructions: http://www.ieee-pses.org/list.html >>> <http://www.ieee-pses.org/list.html> (including how to unsubscribe) >>> List rules: http://www.ieee-pses.org/listrules.html >>> <http://www.ieee-pses.org/listrules.html> >>> >>> For help, send mail to the list administrators: >>> Scott Douglas <[email protected] <mailto:[email protected]>> >>> Mike Cantwell <[email protected] <mailto:[email protected]>> >>> >>> For policy questions, send mail to: >>> Jim Bacher: <[email protected] <mailto:[email protected]>> >>> David Heald: <[email protected] <mailto:[email protected]>> >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected] <mailto:[email protected]>> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> <http://www.ieee-pses.org/emc-pstc.html> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ >> <http://product-compliance.oc.ieee.org/> can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> <http://www.ieee-pses.org/listrules.html> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected] <mailto:[email protected]>> >> Mike Cantwell <[email protected] <mailto:[email protected]>> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected] <mailto:[email protected]>> >> David Heald <[email protected] <mailto:[email protected]>> >> > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
