We've been EAC marking for a while, but I was not aware that the Ukraine was part of the EAC marking scheme.
For EAC marking: -There are a few additional pieces of information required in the manual related to expected life, including when stored. -We are careful about what technical information we share. -We submit a Russian manual, plus Russian translations of the parts of our CE technical file that we share. Contact me separately if you have questions about EAC marking. Mike Sherman Graco Inc. > On 09/22/2020 12:40 PM Steve Brody <[email protected]> wrote: > > > Brian, > > One of my client's was going to sell into the Ukraine and was told they > needed an EAC mark on the product and that the CE was not valid in the EAC. > They did not proceed beyond that so I can not give you any further guidance. > > You can check EAC 3rd parties on line, I think. I had this discussion > with UL as to why Ukraine, and the EAC, would not accept the CB Scheme > report, which is why the client went that route, but the answer was that it > still needed to go through an EAC 3rd party before they would issue a mark. > And that included a physical product review and factory inspection. The > unanswered question then was what does the CB report buy me - no response. > > Client opted not to sell into the EAC. > > > > On 09/22/2020 12:53 PM Brian Kunde <[email protected]> > wrote: > > > > > > Greetings All. > > > > All of a sudden we are having trouble with Ukraine. Before we even > > ship our product to the customer, we are being contacted by unknown > > companies who claim to be responsible to overlook the installation and > > perform "complex protocols" on our product. They are asking for EMC and > > Safety test reports among other R&D type of test data. Is this for real? > > > > Doing a Google search on this topic, it appears as though Ukraine > > should accept our CE Marking and Declaration from Europe. However, they are > > telling us that their laws changed and they no longer accept the CE > > marking. > > > > What is going on? Is there a simple way to satisfy whatever the > > new requirements are? > > > > I appreciate any help you can provide. > > > > Best Regards, > > > > The Other Brian > > > > > > - > > ---------------------------------------------------------------- > > > > This message is from the IEEE Product Safety Engineering Society > > emc-pstc discussion list. To post a message to the list, send your e-mail > > to <[email protected] mailto:[email protected] > > > > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieee-pses.org/emc-pstc.html > > > > Attachments are not permitted but the IEEE PSES Online Communities > > site at http://product-compliance.oc.ieee.org/ can be used for graphics (in > > well-used formats), large files, etc. > > > > Website: http://www.ieee-pses.org/ > > Instructions: http://www.ieee-pses.org/list.html (including how to > > unsubscribe) http://www.ieee-pses.org/list.html > > List rules: http://www.ieee-pses.org/listrules.html > > > > For help, send mail to the list administrators: > > Scott Douglas <[email protected] mailto:[email protected] > > > Mike Cantwell <[email protected] mailto:[email protected] > > > > > For policy questions, send mail to: > > Jim Bacher <[email protected] mailto:[email protected] > > > David Heald <[email protected] mailto:[email protected] > > > > > > > Steve Brody > [email protected] mailto:[email protected] > C - 603 617 9116 > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] mailto:[email protected] > > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site > at http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) http://www.ieee-pses.org/list.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected] mailto:[email protected] > > Mike Cantwell <[email protected] mailto:[email protected] > > > For policy questions, send mail to: > Jim Bacher <[email protected] mailto:[email protected] > > David Heald <[email protected] mailto:[email protected] > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
