Hi Richard,
EN62368-1 asks for Flammability of VW-1 But the manufacturers data sheet states UL1007 for the wiring I am trying to compare to see if they are equivalent or similar. Regards Steve Clarke Test Engineer Unit 3 Compliance Ltd EMC : Electrical Safety : Environmental & Vibration : CE & UKCA : Consultancy www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> | [email protected] <mailto:[email protected]> | +44(0)1274 911747 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 From: Richard Nute <[email protected]> Sent: Monday, October 30, 2023 6:07 PM To: [email protected] Subject: Re: [PSES] UL1007 vs VW-1 Flammability ratings Hi Steve: VW-1 is roughly equivalent to V-1 except applies to wire. Richard Bend, Oregon From: Stephen Clarke [U3C] <[email protected] <mailto:[email protected]> > Sent: Monday, October 30, 2023 8:50 AM To: [email protected] <mailto:[email protected]> Subject: [PSES] UL1007 vs VW-1 Flammability ratings Hello Experts I have a battery box that has wiring to UL1007. I can see that UL1007 has a vertical flame test requirement. How dose this compare with UL VW-1 ? Regards Steve Clarke Test Engineer Unit 3 Compliance Ltd EMC : Electrical Safety : Environmental & Vibration : CE & UKCA : Consultancy www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> | [email protected] <mailto:[email protected]> | +44(0)1274 911747 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
