Hello PSES members, I'm reaching out to see if other members are hearing about or are experiencing the following:
* China's Regulatory Surveillance Body, CNCA, is pulling samples of ITE products constructed with V-0 flame rated enclosures from the production line and performing a 60 second needle flame test per Annex S.2 of the 62368 standard? Thank you in advance for your feedback. Best regards, Brad [cid:f89014aa-642d-40f0-b204-011ed453d6df] Brad Willard my pronouns: he/him/his Manager, Product Safety & Test Atlanta, GA Engineering Shared Services ZEBRA TECHNOLOGIES CORPORATION +1 678 462 7666 [email protected]<mailto:[email protected]> www.zebra.com<http://www.zebra.com/> ________________________________ - CONFIDENTIAL- This email and any files transmitted with it are confidential, and may also be legally privileged. If you are not the intended recipient, you may not review, use, copy, or distribute this message. If you receive this email in error, please notify the sender immediately by reply email and then delete this email. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
