I am looking to purchase the test equipment necessary to test Radiated Electromagnetic and Magnetic Field (EMF) between 100Khz and 30Mhz at very close distances to the product. Our goal is to buy something economical to quick-check a couple products we make, so we are looking for a way to measure these measurements without breaking the bank. Any suggestions.
Also, are there any experts in EMF testing that would be willing to answer a few questions regarding limits? I have read through the ICNIRP guides and found them to be very difficult to understand; especially in the 100kHz to 300Ghz document. On occasion, we get test reports from field evaluations and the limits they use does not seem to line up with anything I have found so far. If there are good online references I have yet to find and read, that would be helpful, too. Thanks to all. The Other Brian - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
