Hi, IEC 61000-4-39 may help


---Original---
From: "Brian Kunde"<[email protected]&gt;
Date: Tue, Feb 24, 2026 00:15 AM
To: "EMC-PSTC"<[email protected]&gt;;
Subject: [PSES] Test Equipment for EMF Testing


I am looking to purchase the test equipment necessary to test Radiated 
Electromagnetic and Magnetic Field (EMF) between 100Khz and 30Mhz at very close 
distances to the product.&nbsp; Our goal is to buy something economical&nbsp;to 
quick-check a couple products we make, so we are looking for a&nbsp;way to 
measure these measurements without breaking the bank.&nbsp; Any 
suggestions.&nbsp;&nbsp;

Also, are there any experts in EMF testing that would be willing to answer a 
few questions regarding limits?&nbsp; I have read through the ICNIRP guides and 
found them to be very difficult to understand; especially&nbsp;in the 100kHz to 
300Ghz&nbsp;document.&nbsp; On occasion, we get test reports from field 
evaluations&nbsp;and the limits they use does not seem to line up with anything 
I have found so far.&nbsp;&nbsp;


If there are good online references I have yet to find and read, that would be 
helpful, too.


Thanks to all.
The Other Brian

 
 
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
[email protected] 
 All emc-pstc postings are archived and searchable on the web at: 
https://www.mail-archive.com/[email protected]/ 

 
Website:  https://ewh.ieee.org/soc/pses/ 
 Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to 
unsubscribe)
 List rules: 
https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf 
 
For help, send mail to the list administrators:
 Mike Sherman at: [email protected]
 Rick Linford  at: [email protected] 
 
For policy questions, send mail to:
 Jim Bacher at:  [email protected] 
 
 
 To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&amp;A=1

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
[email protected]

All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/

Website:  https://ewh.ieee.org/soc/pses/
Instructions:  https://ewh.ieee.org/soc/pses/list.html (including how to 
unsubscribe)
List rules: 
https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf

For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

Reply via email to