Inside the ini file you are using there are the following lines: #HALFILE = xylotex_pinout.hal HALFILE = standard_pinout.hal
simlpy remove the comment character '#' from the first line, and add it to the second one. Regards, Alex ----- Original Message ----- From: "Rod Welland" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Wednesday, May 23, 2007 10:31 AM Subject: Re: [Emc-users] How to > Yes Sven you are dead right, the mistake I was making was trying to do it > using Nero SmartStart which would have been alright if I had closed the > window that appears and gone straight to Recorder then Burn Image. However > I > did persivere and eventually work it out. I have now had Ubuntu+EMC2 > installed on my PC for a couple of days and all is working well. However > the > configuration procedure for a specific machine seems rather more complex > than it is for TurboCNC. I am using the Xylotex driver board on a bench > mill, I found the Xylotex configuration in the samples but can't seem to > get > it to run it always seems to load with the standard pin outs I did try > removing these files and just leaving the Xylotex and metric files in the > folder but this did'nt work either. Any help from you guy's would be very > welcome. > > Thanks Rod. > ----- Original Message ----- > From: "Sven Mueller" <[EMAIL PROTECTED]> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: Tuesday, May 22, 2007 7:52 PM > Subject: Re: [Emc-users] How to > > >> Rod Welland wrote on 20/05/2007 17:28: >> >>>> I think you hit it on the head Ray Nero has not created a boot disc >>>> there is only one file on the CD and not the 9 or so I should be >>>> seeing. So I,m going to download another CD burning prog form the >>>> internet today and have another go. >> >> >> You probably created a new project in Nero and added the file you >> downloaded. Instead, you should select "burn image" (or similar) from >> the recorder menu item. In the file dialog that appears, you should then >> select the image you downloaded from linuxcnc.org. >> >> regards, >> Sven >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by DB2 Express >> Download DB2 Express C - the FREE version of DB2 express and take >> control of your XML. No limits. Just data. Click to get it now. >> http://sourceforge.net/powerbar/db2/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.467 / Virus Database: 269.7.6/815 - Release Date: 5/22/2007 > 3:49 PM > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users