Sorry, forgot to put in a subject! ----- Original Message ----- From: "RogerN" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, June 09, 2007 7:28 AM Subject: [Emc-users] (no subject)
> Now that I some parts of my lathe functional, how do I set the encoder > count on Axis user interface? For example, I want to put in tool 1, > take a skim cut on a piece using jog keys, measure, calculate radius, > and then set my screen X for the radius, all other tool offsets will > be > offset from tool 1, correct? I don't have my home & limit switch > wires > figured out yet. > > Second question, I'm ready to try connecting my spindle encoder to my > Mesa 5i20 board. Can I connect this as an encoder to axis 2 or 3, or > should I connect it to general purpose inputs to be configured as a > counter? > > I got a Hitachi variable frequency drive ordered last night, it's > supposed to take my single phase in and drive my 3hp spindle motor. I > need it mostly for a phase converter but the variable speed will be > nice > too, my lathe only has 6 gear speeds between 128 and 2800rpm. > > > Thanks! > > Roger Neal > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
