----- Original Message ----- From: "Chris Radek" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Wednesday, June 13, 2007 8:07 AM Subject: Re: [Emc-users] Homing and f-error
> You have to arrange not to do that. A separate home switch seems like > the best answer, but it's probably not the easiest. (I'm not sure > what the easiest would be). I say the separate switch is best, > because any other solution would involve sometimes disabling your > safety measures on the limit switches. > > Chris I had an idea I plan to try on my machine when I get to that point. Have a push button that jumps limit switches only while held in. My machine had motor and belt guards which means I have to dis-assemble the machine or hotwire to enable the amps to jog it off the limit switch. My purpose was to be able to jog off limit switches but it could also be held while homing from limit switches. Roger ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
