On Sun, 2007-10-21 at 09:56 -0400, Gene Heskett wrote: > On Sunday 21 October 2007, [EMAIL PROTECTED] wrote: > >John Kasunich wrote: > >> Even better, if you can get some, is a braid that can be expanded enough ... snip > > > Regarding motor cables: I am using a Belden microphone cable called > Star-Quad, which has 4 conductors in a good shield that I use with my xylotex > volt away from the rails if possible. ... snip > Food for thought guys. From an old fart C.E.T.
How about RG11 or LMR400 for the spindle motor leads. I have a 2hp motor, so the 14 gauge center conductor should be large enough. With a 0.4 inch diameter, I would need to go to a larger conduit. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe Bridgeport mill conversion pending Zubal lathe conversion pending) ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
