On Mon, 2007-12-03 at 13:00 -0500, Gene Heskett wrote: > On Monday 03 December 2007, Emory Smith wrote: > >Unless you already have some sort of RS232 receiver/decoder for those ... snip > >7 outputs to drive 3 home LEDs, 3 limit LEDs and a Xen LED. > > > >HTH, > >Emory > > Hi; I'm considering adding enough ports to run my lathe too, and looking at > this card > <http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=1003992> > > and the 4 axis xylotex 425 kit to do it with. Probably around $30 delivered. > > The xylotex kit I already have so that's not a problem. Has anyone here any > experience with such a beast as this dual port card might be? > > Thanks.
I have a two port PCI card that appears to be similar. I seem to recall, lspci reports one entry with additional memory space blocks. I just guessed at the first and fourth block for the driver parameters, and it worked just fine. No magic really. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
