Thank you very much for all informations. I'm from Italy and buy these kit in England or in USA is a bit the same thing for me.
Do you think that the kit 2 with integrated power supply drivers is better? And maybe with an extra active breakout board? http://www.motioncontrolproducts.co.uk/product_info.php?cPath=5&products_id=7&osCsid=f2f7789e24151d24d72b40ae1b5e7df7 Best regards, Pella Ray Henry ha scritto: > Hi Svenne > > Oh. I wasn't thinking of defining the quality of the product by the > difficulty getting around the site. That comment was just waiting and > waiting at my end of the dialup drip feed. > > The motors look great at 1800+ ounce inch. This system is tough enough > for some pretty good sized machines by benchtop/Bridgeport standards. > The drives seem good for the money. > > One issue is location. If this is for delivery in the EU I'd say it's > probably as close as you get after you add VAT and shipping to something > from further away. > > An equivalent setup in the USA could look something like this. > > 3 - KL34H2160-62-8A motors $537.00 > 3 - KL-8056 drives $276.00 > 1 - KL- 7212 power supply $149.00 > 1 - PMDX-122 active breakout $81.00 > > Total $1043.00 > > I'm not even going to guess at the exchange rate but will leave that to > the interested reader. The kit listed a bit over 500 pounds for cost so > they look pretty close. > > Now it would be possible to save a bit on the drives and still meet the > requirements of these motors. The power supply is way overkill but > ready to go. (Both Gene and I would build the power supply but wouldn't > require someone else to do that.) > > Notice that I added an active breakout board to get round the 5 volt > logic and also to provide a charge pump to which I can add external > wiring for the axis enables, real estop and such. > > Links for products in the order listed above. > http://www.kelinginc.net/NEMA34Motor.html > http://www.kelinginc.net/KLDriver.html > http://www.kelinginc.net/SwitchingPowerSupply.html > http://www.pmdx.com/ > > And thanks for the prod Svenne. > HTH > > Rayh > > > On Thu, 2007-12-13 at 22:07 +0100, Svenne Larsson wrote: >> Don't judge a company or its products because of the web site. I know >> a guy who's way richer than many others and his web site is just plain >> ol' text... >> So, to help the guy out here, what should he buy instead?.. >> >> >> 2007/12/13, Gene Heskett <[EMAIL PROTECTED]>: >> >> I had a better description Ray, but it wasn't >> printable. OTOH, could I do >> better? Might take me a few days, but I think so. :) >> >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services >> for just about anything Open Source. >> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace >> _______________________________________________ Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
