New this just many and like evreyone we have problems setup so here's the
scoop. Dose any anyone here have a system with a mini-io card from
http://www.candcnc.com/ installed and working. The big picture is a bridgeport
mill to be installed on but would to setup on a bench first so.
First thing is we have a pc
1-intel 3.2gb ram 1gb hd160 sata
2-mini-io card
3-viper servo drivers
4-motors
5-software ubuntu 6.06 with emc.2 latest
Software loaded next would like get the mini-io card working from before
hooking up the motors if possible, we also have the other card like remote
relay card and a expansion card for a pendent but like see that added at the
end. Beening newdosen't help but we need to start some where.
Take it easy on me I have a long way to go.
Luke
_________________________________________________________________
Exercise your brain! Try Flexicon!
http://puzzles.sympatico.msn.ca/chicktionary/index.html?icid=htmlsig
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
