On Jan 5, 2008, at 9:15 AM, Kirk Wallace wrote: > On Sat, 2008-01-05 at 10:53 -0500, Luke Cardinal wrote: >> >> >> New this just many and like evreyone we have problems setup so here's >> the scoop. Dose any anyone here have a system with a mini-io card >> from >> http://www.candcnc.com/ installed and working. The big picture is a >> bridgeport mill to be installed on but would to setup on a bench >> first >> so. > > If you don't have the mill you are converting yet, I have found > that you > will be much better off converting a mill that is already a CNC.
Truer words are seldom spoken. You tend to get ball screws and limit switches; really handy things. :-) Dave >> >> Luke > > CNCZone has some good threads on Bridgeport conversions, such as: > > http://cnczone.com/forums/showthread.php?t=18178 > > A search should provide many more. > > My conversion is here: > > http://www.wallacecompany.com/machine_shop/ > > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending) > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
