Kirk Wallace <[EMAIL PROTECTED]> writes: > > On Sat, 2008-03-01 at 21:51 +0000, Brian W.Gilman wrote: > > Kirk Wallace <[EMAIL PROTECTED]> writes: > > > >
> I have no experience with "standard" servo drives. If you have a model > number for these drives I could check the softservo.com website for > information relevant to EMC. > > Yes, you will need to have an IO card of some type to take over the > function of the versiobus and the interface it was connected to. I'm going to move slowly with this. It needs to be done, but I'm just one guy with a small budget. First thing will be to re-contact ORMEC to see if they can give me ANYTHING on the drives. THen I will find a good, easy to set up IO board. I can't see finishing this in six months at the rate I need to work. By the way, does anyone know how I can bone up on ladder logic? ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
