On Mar 20, 2008, at 1:16 PM, list wrote: > Thanks for the info. Just wanted to make sure PWM (or PDM) up/down was > possible with Mesa boards. For the money, I knew the 7i43 was a good > deal with 8 encoders/8 PWM outputs plus additional unused FPGA space > compared with Pluto's 4/4. Sebastian and Peter, thanks for Mesa hal > drivers. > > Know I've got to figure out how deal with 50 pin IDC connectors, nice > for clean Mesa board to board connections, but what a pain for > homebuilt > parts scrounging. I've got a butt load of old SCSI cables, cards and > misc junk, so hopefully that will help with building stuff. I can't > see > spending $70+ for 50 pin screw connectors.
http://www.daqstuff.com/50_pin_daq.htm half that price ... and worth it to avoid all the trouble of making a couple of custom boards. Now if you can make your own boards then this might not look so attractive unless you have other things to do with your time. ;-) HTH Dave > > Sam> > I'm planning to build something similar to your h-bridge at > http://www.cnczone.com/forums/showthread.php?t=25929. BTW, the > Milwaukee > Matic in your shop is a monster, nice! > > Keil > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Gene > Heskett > Sent: Thursday, March 20, 2008 8:13 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Mesa 7i43 PWM Output mode > > On Thursday 20 March 2008, sam sokolik wrote: >> Yes - this was strictly for the mesa card (I have both the pluto and > mesa >> card). Both pwmgen and the pluto have the option for up/down pwm. >> >> sam > > And thats what I get for not going back and re-reading the earlier > parts > of > the thread, sorry Sam. > > -- > Cheers, Gene > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > <kira> Ada, the only language written to milspec. > <Mikster> <shudder> > > ---------------------------------------------------------------------- > -- > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
