On Wednesday 16 April 2008, John Kasunich wrote:
>Gene Heskett wrote:
>> Greetings guys;
>>
>> I edited the ini file and slowed the A axis down to 10%, or maxvel=7.2,
>> with corresponding slowdowns in the accel's too. and I added another 9 in
>> front of its limits so it can now turn 99,999 degrees.
>>
>> Then I re-figured the cut for a .003" per A revolution, giving 61,200
>> degrees of A motion and fired off the cut at f0.008 with g93 active, which
>> worked rather well, but took several hours as the A table was turning
>> rather leasurely.
>>
>> When I get the time, I'll play with that some more & see if I can make any
>> sense out of it. What I was getting last night sure was off the wall.
>
>F.008 in inverse time mode means 1/0.008 = 125 minutes. It should have
>taken 2 hours and 5 minutes.
>
>Regards,
>
>John Kasunich
I didn't time it John, but that sounds about right. I was up to my buns in a
different pool of alligators, the inner filament contact for a final tube in
a tv transmitter & had left it running itself while I went looking for some
silver braze rod. The only thing I have is some pretty old nickle-silver rod
whose flux has worn off from laying around. I have it mostly fixed, but need
to locate some chemistry for silver plating the repair. Suggestions anyone?
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
There's a way out of any cage.
-- Captain Christopher Pike, "The Menagerie" ("The Cage"),
stardate unknown.
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
