Gene, See: http://www.caswellplating.com
They have kits for all sorts of plating, anodizing, etc. Ken ----- Original Message ----- From: "Gene Heskett" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Wednesday, April 16, 2008 9:52 PM Subject: Re: [Emc-users] My runaway A axis problem. > On Wednesday 16 April 2008, John Kasunich wrote: >>Gene Heskett wrote: >>> Greetings guys; >>> >>> I edited the ini file and slowed the A axis down to 10%, or maxvel=7.2, >>> with corresponding slowdowns in the accel's too. and I added another 9 >>> in >>> front of its limits so it can now turn 99,999 degrees. >>> >>> Then I re-figured the cut for a .003" per A revolution, giving 61,200 >>> degrees of A motion and fired off the cut at f0.008 with g93 active, >>> which >>> worked rather well, but took several hours as the A table was turning >>> rather leasurely. >>> >>> When I get the time, I'll play with that some more & see if I can make >>> any >>> sense out of it. What I was getting last night sure was off the wall. >> >>F.008 in inverse time mode means 1/0.008 = 125 minutes. It should have >>taken 2 hours and 5 minutes. >> >>Regards, >> >>John Kasunich > > I didn't time it John, but that sounds about right. I was up to my buns > in a > different pool of alligators, the inner filament contact for a final tube > in > a tv transmitter & had left it running itself while I went looking for > some > silver braze rod. The only thing I have is some pretty old nickle-silver > rod > whose flux has worn off from laying around. I have it mostly fixed, but > need > to locate some chemistry for silver plating the repair. Suggestions > anyone? > > -- > Cheers, Gene > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > There's a way out of any cage. > -- Captain Christopher Pike, "The Menagerie" ("The Cage"), > stardate unknown. > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
