On Tue, 2008-04-29 at 20:20 -0600, rtwas wrote: > Hello, > > I'm using emc 2.2.2 and can't seem to override limits. This makes it > hard to realign the table > manually if emc2 happens to quit oposite the normal *home* position. Is > there a workaround > until emc2's *override limits* button becomes functional? > > Thanks. > > > Robert W.
I am not clear on what you are trying to describe. Can you can recall the procedure you used to create your problem? The home position should not limit normal axis movement, unless your home is at one of the limits. When you mention manually aligning the table, do you mean by moving the axis with your hand or by using EMC to jog the axis? If the the limits override is not available, it may be due to your configuration file not calling out limit switches that can be overridden. A description of your machine and a link to your configuration files would be good. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
