sounds like a buffer overflow to me...
2008/5/13 Snieder <[EMAIL PROTECTED]>:
> Hi Rayh,
>
> >What configuration are you using, sim, a parallel port, or some other
> >hardware interface?
>
> There is a parallel interface. Before start emc, I use rmmod to remove
> parpot_serial, parport_pc and partport modules.
>
> >Is there enough time after closing EMC2 to "lsmod" and see if all of the
> >rtai modules have been removed?
>
> Yes, I've 30-40 secs after closing emc. All rtai modules have been removed
> and no emc and rtai processes are runnig.
>
> Before the system freezes, first the mouse begins to act wierd, shortly
> after that keyboard does the same.
>
> Laszlo
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
