can you give a bit more info about your setup? put the kernel config on pastebin.ca can you do the same for lspci -vv, uname -a, cat /proc/cpuinfo, cat /proc/meminfo
Regards, Alex ----- Original Message ----- From: Svenne Larsson To: Enhanced Machine Controller (EMC) Sent: Tuesday, May 13, 2008 10:21 AM Subject: Re: [Emc-users] suse10.3 - after exit linux freezes sounds like a buffer overflow to me... 2008/5/13 Snieder <[EMAIL PROTECTED]>: Hi Rayh, >What configuration are you using, sim, a parallel port, or some other >hardware interface? There is a parallel interface. Before start emc, I use rmmod to remove parpot_serial, parport_pc and partport modules. >Is there enough time after closing EMC2 to "lsmod" and see if all of the >rtai modules have been removed? Yes, I've 30-40 secs after closing emc. All rtai modules have been removed and no emc and rtai processes are runnig. Before the system freezes, first the mouse begins to act wierd, shortly after that keyboard does the same. Laszlo ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
