Hi Servo Dynamic told me that have encoder with too much resolution is not help because drive will not be able to process or use too much pulses from encoder. Are there a MAXIMUM limits of pulses from encoder? can i joint to shaft of my motor another encoder -High-resolution http://www.opticalencoder.com/pdf/CP-850-950-HHC.pdf and connect that encoder to EMC2? forget about encoder on the motor?
> > Hi Aram > > The bad news is that if you attempt to change encoder you will find the > motor will no longer work. The good news is that you can simply add an > encoder somewhere in the drive chain and EMC will be pleased to use that > rather than the motor's encoder. > > There have also been a bunch of patents issued and reports released of > projects that multiply the pulses from an encoder. You might dig a bit > and find such hardware/software schemes. Be sure that you put the > multiplier after the motor drive rather than between the motor and > drive. > > HTH > > Rayh > > > On Wed, 2008-06-04 at 19:38 -0600, [EMAIL PROTECTED] wrote: >> Hi >> what it is mean accuratly aligned with motor position? >> Should i use electronics instrument for that or just posion by looking >> some marker - hole dots? >> >> > [EMAIL PROTECTED] wrote: >> >> Hi >> >> I am looking for more info about why I can not take out encoder from >> AC >> >> servomotor and put another in? >> > If the motor has commutation sensors (Hall signals) built into >> > the motor, and separate from the encoder, then there is no problem. >> > >> > Many newer motors, like the SEM and Servo Dynamics, have >> > integrated these functions, and so the commutation encoder needs >> > to be accuratly aligned with the motor position. >> > w >> > Jon >> > >> > ------------------------------------------------------------------------- >> > Check out the new SourceForge.net Marketplace. >> > It's the best place to buy or sell services for >> > just about anything Open Source. >> > http://sourceforge.net/services/buy/index.php >> > _______________________________________________ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> >> >> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
