Hi
what it is mean accuratly aligned with motor position?
Should i use electronics instrument for that or just posion by looking
some marker - hole dots?

> [EMAIL PROTECTED] wrote:
>> Hi
>> I am looking for more info about why I can not take out encoder from AC
>> servomotor and put another in?
> If the motor has commutation sensors (Hall signals) built into
> the motor, and separate from the encoder, then there is no problem.
>
> Many newer motors, like the SEM and Servo Dynamics, have
> integrated these functions, and so the commutation encoder needs
> to be accuratly aligned with the motor position.
> w
> Jon
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>



-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to