I've been using G92. I still haven't wrapped my head around the point of the G54 type coordinate systems. If using a vise with a vise stop or a jig that isn't guaranteed to be in the same place every time you mount it, what's the point?
I know I am probably missing something obvious... >Len -----Original Message----- From: Ray Henry [mailto:rehe...@copper.net] Sent: Tuesday, December 16, 2008 11:24 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] end of program What kind of offsets are these that you are trying to save? G92 offsets have a procedure for saving and recalling. G54-59.3 are saved. On Tue, 2008-12-16 at 11:10 -0600, Len Shelton wrote: > Okay - the errors went away, but M60 only stops the program temporarily. I > sill have to hit the stop button in Axis to be able to jog the machine. I > want a full stop, like M30, but without resetting my offsets. > > Any ideas? > > >Len ---------------------------------------------------------------------------- -- SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users