I pulled M60 from this documentation: http://linuxcnc.org/docs/html/gcode_main.html#sub:M0,-M1,-M2,
Where it says: To exchange pallet shuttles and then stop a running program temporarily (regardless of the setting of the optional stop switch), program M60. It indeed does only "stop the program temporarily" (read "pause"). After which I have to actually hit the stop button to regain manual control over the machine. >Len -----Original Message----- From: Chris Radek [mailto:ch...@timeguy.com] Sent: Tuesday, December 16, 2008 1:48 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] end of program On Tue, Dec 16, 2008 at 11:10:32AM -0600, Len Shelton wrote: > Okay - the errors went away, but M60 only stops the program temporarily. I > sill have to hit the stop button in Axis to be able to jog the machine. I > want a full stop, like M30, but without resetting my offsets. > > Any ideas? Now you've lost me. M60 (and guessing it was a typo, M6) are not even valid codes. Can you start again at the beginning and say what you're trying to do? What offsets are you talking about? Ray asked this too. We may be trying to answer the wrong question. ---------------------------------------------------------------------------- -- SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
