I have a lathe that has an automated tool turret, which I had working with a version of TRUNK several months ago. I cvs updated my copy of TRUNK and recompiled yesterday and I now have a problem in Classicladder. I have one S32 input to Classicladder which is connected to the tool prep number from iocontrol. The tool prep number changes when a "Tn" block is executed (in MDI), and shows up correctly in the HAL configuration display in Axis, both on iocontrol.0.tool-prep-number, and on classicladder.0.s32in-00.
The problem is that the value of %W0 in Classicladder stays equal to 0, not the value of classicladder.0.s32in-00. Relevant files: http://www.mattshaver.com/kc6/kc6.hal http://www.mattshaver.com/kc6/kc6.clp Any ideas? Anyone else using word variables in CL with TRUNK? Thanks, Matt ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
