http://www.linuxcnc.org/docs/devel/html/ladder_classic_ladder.html#r1_8
John On 16 Dec 2008 at 15:58, Matt Shaver wrote: > I have a lathe that has an automated tool turret, which I had > working > with a version of TRUNK several months ago. I cvs updated my copy > of > TRUNK and recompiled yesterday and I now have a problem in > Classicladder. I have one S32 input to Classicladder which is > connected > to the tool prep number from iocontrol. The tool prep number > changes > when a "Tn" block is executed (in MDI), and shows up correctly in > the > HAL configuration display in Axis, both on > iocontrol.0.tool-prep-number, > and on classicladder.0.s32in-00. > > The problem is that the value of %W0 in Classicladder stays equal to > 0, > not the value of classicladder.0.s32in-00. > > Relevant files: > > http://www.mattshaver.com/kc6/kc6.hal > http://www.mattshaver.com/kc6/kc6.clp > > Any ideas? Anyone else using word variables in CL with TRUNK? > > Thanks, > Matt > > > > -------------------------------------------------------------------- > ---------- > SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, > Nevada. > The future of the web can't happen without you. Join us at MIX09 to > help > pave the way to the Next Web now. Learn more and register at > http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visit > mix.com/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
