Peter C. Wallace wrote: > On Tue, 16 Dec 2008, Richard Acosta wrote: > >>> Did sc7i43P report that the 7I43 had a 400K FPGA? >>> >> Yes it says a 400k >>> Well it should say something like: >>> >>> Pass: 1 Error Count: 0 loop count: 100000 >>> Pass: 2 Error Count: 0 loop count: 200000 >>> Pass: 3 Error Count: 0 loop count: 300000 >> and i confirm this too. > > Have you tried upgrading to 2.2.8? > > I just did this on a test machine here (motherboard parallel port @ 0x378, > 7I43-4 connected), started emc, (absolutely stock, no changes) doubleclicked > on the hm2servo sample config (from Ted Hyde) and I was up and running (well > I > dont have machine attached but I did end up with a Axis being a nice 3d > Etch-A-Sketch when I turned the motor shafts.
If 2.2.7 doesnt work for him, i dont know why 2.2.8 would. Something's wrong with Richard's hardware. -- Sebastian Kuzminsky "Okay, people. Now is the time to start discussing the rules of war for autonomous robots. Now, when it's still theoretical." -- Bruce Schneier ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
