Stuart Stevenson wrote: > On Sun, Dec 21, 2008 at 1:01 PM, Richard Acosta <eyela...@gmail.com> wrote: >> Is nothing about lazyness... is about being tired of to do something >> that is supossed to work.. and it does not! again and again and again. >> >> When going your lazy path i got the following two messages. >> >> "Acercar linea 10 en /usr/shareaxis/images/axis.ngc: bad character "x" used" > > this message tells you there is something wrong near line 10 of the file: > /usr/shareaxis/images/axis.ngc > > it even tells you what is wrong: > bad character "x" used > > your response to this should be: > open the file with an editor and look for an "x" character on or near line 10 > if you cannot figure out what the error is then post a copy of a few > lines prior and a few lines past > > someone will try to help you > people are trying to help you now - they just don't have enough information
Something is fishy here though - isn't axis.ngc the EMC2 splash screen program? Hundreds of users are loading that g-code file every time they start EMC, and it isn't causing errors. Also, "X" is a perfectly legitimate character in g-code. Stuart is exactly correct in that the proper action is to READ the message, THINK about what it means, and LOOK for the cause of the problem. Regards, John Kasunich ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
