Hi Alan, I have been fighting with a similar 810 video problem in an HP pavillion 510n box. At the start, I could not get higher than 800x600 resolution. I did a bios upgrade and now I can get a full 1400x900 for my LCD. Unfortunately, the intel 810 onboard video does not like opengl windows.. I can run axis or glxgears, but get total screen disruption (crap writing all over the screen). This occurred on both ubuntu 8.04 and 8.10 installed distributions. This box also needs the SMI fix to get latencies in the 30,000ns range (over 120,000ns without the SMI module installed). All in all, not a box I would use for emc. Please drop a note on this list if you do have any success with the 810 video. cheers Lawrence
On Mon, 2009-01-12 at 20:05 -0800, Alan Condit wrote: > OK, I finally got my machine hooked up to the web for long enough to > do all the updates and got EMC2-2.2.8 running. Now I am still getting > the venetian blinds. I tried all the fixes that I could find, but no > joy in Mudville. My motherboard has an Intel 810 onboard video. I > have a pci parallel port card in my PCI slot, so adding a separate > video card is not a desireable option. > > Any other suggestions. > > Alan > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- ===================================================================== Lawrence Glaister VE7IT mailto:[email protected] 1462 Madrona Drive Nanoose Bay, B.C. http://members.shaw.ca/swstuff Canada V9P 9C9 http://gspy.sourceforge.net ===================================================================== ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
