Donnie Timmons wrote: > Tom > > I'm glad your up and running. Nice looking part! > > Seam I made the mistake of going the 5i23 on my machine and the drivers are > faulty. No ouputs.
Has either Seb Kuzminsky or Peter Wallace told you that the drivers are faulty? If they say it works, it works, and the problem is on your end. If they say it is broken, then it is broken (but a fix will probably follow very quickly). Did you read the message from Seb about num_stepgens? You are enabling a step generator, and the pins it uses CANNOT be used for general purpose I/O. You will have to turn off the stepgen if you want to use those pins. > So I was looking at starting over with a 5i20 to replace the 5i23 and use the > 7i33 and 7i37 I already have. If Seb and/or Peter haven't had a chance to test your specific case yet, then you shouldn't be so quick to jump to conclusions (and spend more money). Regards, John Kasunich ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
