Hello John, I can't understand all that chat about Mesa 5xxx and 7xxx etc. without knowing what these boards are and what they do. I see that Mesa boards and their names are used widely in EMC. Here in Germany I can't even find the brand name of Mesa in ebay. Please supply a link to descriptions so I can go looking for something comparable on the European market.
Thanks Peter Blodow At 06:04 18.01.2009, you wrote: >Donnie Timmons wrote: > > Tom > > > > I'm glad your up and running. Nice looking part! > > > > Seam I made the mistake of going the 5i23 on my machine and the drivers > are faulty. No ouputs. > >Has either Seb Kuzminsky or Peter Wallace told you that the drivers are >faulty? If they say it works, it works, and the problem is on your end. > If they say it is broken, then it is broken (but a fix will probably >follow very quickly). > >Did you read the message from Seb about num_stepgens? You are enabling >a step generator, and the pins it uses CANNOT be used for general >purpose I/O. You will have to turn off the stepgen if you want to use >those pins. > > > So I was looking at starting over with a 5i20 to replace the 5i23 and > use the 7i33 and 7i37 I already have. > >If Seb and/or Peter haven't had a chance to test your specific case yet, >then you shouldn't be so quick to jump to conclusions (and spend more >money). > >Regards, > >John Kasunich > >------------------------------------------------------------------------------ >This SF.net email is sponsored by: >SourcForge Community >SourceForge wants to tell your story. >http://p.sf.net/sfu/sf-spreadtheword >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
