On Fri, 23 Jan 2009, Richard Acosta wrote: > Date: Fri, 23 Jan 2009 20:54:03 -0200 > From: Richard Acosta <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "emc >> \"Enhanced Machine Controller (EMC)\"" > <[email protected]> > Subject: [Emc-users] 7i43 and pinout. > > Hello again, after a while i'm going back to put my hands on this project. > > > I'm now about to connect a linear encoder, but, i don't know how to > connect it. > I downloaded the three manuals available, and found about pwmgen > connection but nothing about an encoder. > > How do i tell EMC2 which pins belong to encoders? > In which file?
There should be a .PIN file that matches the name of the firmware file you are using, say SVST4_6.PIN for example. I'm not sure off hand where this is in the EMC distribution but locate should find it. This file has the pinout information for the matching bitfile. You can also set the "debug_pin_descriptors" flag when launching hostmot2. (man hostmot2). These .PIN files are also in our (Mesas) normal 7I43 distribution zip file > > Thanks! > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
