On Feb 19, 2009, at 9:36 AM, Jon Elson wrote: > Stuart Stevenson wrote: >> Gentlemen, >> For a few days I have been chasing a problem with the B axis >> overtraveling to -360 degrees when I change from manual to mdi. > I know only a little bit, but one thing I always look for when > something > suddenly goes wierd in EMC is some odd value left in the var file. > You > can even swap out your var file with one that is all zeroes except for > that one pesky value that needs to be 1.0 (I forget which that is, > but > it is documented and should be in the archive.) > > Jon
5220 should be 1.0000 I've often been tempted to write a C program the does just that and leaves all the offsets alone. ;-) Dave > > ---------------------------------------------------------------------- > -------- > Open Source Business Conference (OSBC), March 24-25, 2009, San > Francisco, CA > -OSBC tackles the biggest issue in open source: Open Sourcing the > Enterprise > -Strategies to boost innovation and cut costs with open source > participation > -Receive a $600 discount off the registration fee with the source > code: SFAD > http://p.sf.net/sfu/XcvMzF8H > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
