I say WOW again. The scope of this is amazing. Solid models of the machine, tools, holding devices, and workpiece in AXIS (or whatever gui used). The realtime evaluation of all these components. again WOW - another world entirely :) would be very nice to have - lets get started :) Stuart
On Sun, Mar 29, 2009 at 12:25 PM, Jon Elson <el...@pico-systems.com> wrote: > Chris Radek wrote: >> On Sun, Mar 29, 2009 at 12:04:45AM -0500, Jon Elson wrote: >> >>> I believe this could be implemented fairly easily. Possibly, it could >>> be hooked up to a variable, allowing for pretty easy setting of the >>> limit position. >>> >> >> In my opinion the difficulty is that it needs to be per-tool to have >> much use. That means adding more stuff to the tool table. >> >> > OK, I can see if there is a wide variation in tool configuration, then > maybe things would have to be different for each tool. > I'm not sure soft limits should really be used for this, just to keep > the individual axes from hitting the ends. Some advanced controls have > "clamp limits" where various combinations of axis positions are > indicated as "don't go here". You could set up regions around your vise > jaws, for instance, to keep the machine from cutting into the vise. > This is a WHOLE lot more involved than just soft limit values for > individual axes. > For instance, it would allow the tool to pass OVER the vise jaw, but > prevent the tool from passing THROUGH the jaw. This would be a nice > feature to have, but I think it is an entirely different thing to do > than just handling soft limits on the axes. > > Jon > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > -- you can lead a person to knowledge but you cannot make him think ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
