I looked at it once but never did try it out. I don't remember why. Thanks for the link
John On 11 Nov 2009 at 13:33, Hubert Bahr wrote: > John Thornton wrote: > > Is there any facility in your software to calcualte feed and > speeds for tools? I find this feature > > very helpful. > > > > I have four different commercial cam softwares and one is not very > good and one is much > > more expensive but somewhat limiting in areas where I feel I > should have complete control. > > The other two fall in the middle. Things like entry point of the > cut I feel should be in > > complete control of the programmer. > > > ... Snip > John have you ever looked at Synergy by Weber Systems. This is what > I > use and it definately calculates feed and speed for your tools. You > do > have to tune it for your machine, rigidity, spindle speeds etc. but > is > designed to give you handbook values of speed and feed. You have > access > to the tool definitions etc. so you have complete control of the > generated G-code. Link http://www.webersys.com/ cad only free > 2-1/2 > axis (basic milling or lathe) very reasonable with upgrades > available > to full multi-axis solid capabilities. I chose the latter as I want > to > play with 4 and 5 axis solids. I have found them extremely > knowledgeable about what is needed. > > Hubert > > -------------------------------------------------------------------- > ---------- > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 > 30-Day > trial. Simplify your report design, integration and deployment - and > focus on > what you do best, core application coding. Discover what's new > with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
